I have few "odd ball" Scott blanks remaining. These are 1970's to early 1980's e-glass blanks.
F60 Brown Glass SOLD
6' 3wt with tip about 1.5" short. Tip measure about .068 Still a great blank. Currently 1 piece but can cut and ferrule to your specs. Blank is still full length so it will still finish out at 6' long. $85 as one piece or $100 as 2 or 3 piece.
8' 6wt Brown Glass SOLD
This was to be made as a 5 piece rod. Made as 1,2,or 3 piece would be a good 5wt or maybe a 5/6wt. Has blem near butt section. Could be made as 7'3" blank with blem concealed under grip or made factory length with blem exposed. Blank is still full length. $75 as one piece or $100 as 2 or 3 piece
6'9" 5/6 wt Brown Glass
Blank was a 4wt pattern rolled on wrong (larger diameter) mandrel. Would make a good short 5/6wt rod. Blank is still full length. $75 as one piece or $100 as 2 or 3 piece
Paypal or credit card only. First to PM gets them.
F60 Brown Glass SOLD
6' 3wt with tip about 1.5" short. Tip measure about .068 Still a great blank. Currently 1 piece but can cut and ferrule to your specs. Blank is still full length so it will still finish out at 6' long. $85 as one piece or $100 as 2 or 3 piece.
8' 6wt Brown Glass SOLD
This was to be made as a 5 piece rod. Made as 1,2,or 3 piece would be a good 5wt or maybe a 5/6wt. Has blem near butt section. Could be made as 7'3" blank with blem concealed under grip or made factory length with blem exposed. Blank is still full length. $75 as one piece or $100 as 2 or 3 piece
6'9" 5/6 wt Brown Glass
Blank was a 4wt pattern rolled on wrong (larger diameter) mandrel. Would make a good short 5/6wt rod. Blank is still full length. $75 as one piece or $100 as 2 or 3 piece
Paypal or credit card only. First to PM gets them.
